CE1TX Compact Evolution One TX Speaker system
EXQUISITELY HONED FOR AN IMMERSIVE SOUNDFIELD EXPERIENCE
The critically acclaimed TAD CE1 speaker system was renowned for its innovative design, both inside and out, to reproduce musical sounds with every detail of the original - without adding or subtracting anything that might alter the subtleties and nuances intended by recording artists and producers. In designing the new TAD CE1TX, we have taken the already impressive performance of the CE1 to the next level by incorporating refinements and innovations inside and out.
The TAD-CE1TX brings a whole new meaning to two-channel music reproduction. The CE1TX combines the pinpoint localisation of sound images with three-dimensional sound field reproduction between the right and left channel speakers to create a 'being there' experience for the listener. You will feel as if you are in a recording studio, listening to the musicians play their parts.
-
- TAD CE1TX Real Wood Veneer Finish
-
- TAD CE1TX High Gloss Black Finish
Made in Japan
years of experience
Press reports
"This TAD is the finest example of speaker engineering I've ever encountered. Absolutely Class A. "
"The frequency balance was more faithful to the source than I have ever experienced in my home listening room, and the soundstage was reproduced with an unusually sharp and three-dimensional feel."
"Überwältigendes „Wie echt“-Erlebnis"
Technical data
| Model | TAD CE1TX (Compact Evolution One TX) |
|---|---|
| Design Principle | 3-way vented-box system (Bi-Directional Aero-Dynamic Slot) |
| Drive Units | Tweeter/midrange, coaxial: 3.5cm beryllium dome / 14cm magnesium cone Woofer: 18cm MACS II cone |
| Performance Data | Frequency response: 34Hz - 100kHz Crossover frequencies: 250Hz, 2kHz Maximum input: 200W Sensitivity: 85dB (2.83V, 1m) Nominal impedance: 4Ω |
| TAD's proprietary technologies | CST* Coaxial-Driver (*Coherent Source Transducer)  CLEAR, NATURAL-SOUNDING MID-TO-HIGH-FREQUENCY REPRODUCTION The CE1TX boasts TAD’s proprietary CST (Coherent Source Transducer) driver, which localizes sound sources for more natural musical reproduction. In this ingenuous design, the directivity of the concentrically mounted midrange and tweeter is finely controlled and perfectly aligned to eliminate even the smallest disruption of sound. Just like tweeters found in TAD’s top-of-the-line R1TX and CR1TX speaker systems, the CE1TX’s tweeter uses a beryllium diaphragm manufactured with our proprietary vapor-deposition technique. The midrange features a newly developed diaphragm made of magnesium, which reproduces a clearer, distortion-free midrange. The result is consistent sound image localization and a natural sound field reproduction over a ultra-wide frequency range from 250 Hz to 100 kHz. MACS II* Woofer (*Multi-layered Aramid Composite Shell gen2)  RICH, SMOOTH MID-TO-LOW-FREQUENCY REPRODUCTION We have upgraded the diaphragm for the 18 cm woofer to a MACS II* diaphragm. It is made of five layers of woven and non-woven fabric to optimize the vibration characteristics of the shell-shaped diaphragm that integrates the center cap and cone into a single piece. Other ingenious woofer design features include a molded rear cradle that fully conveys the powerful driving force of the large neodymium magnet, and the turbulence-suppressing aerodynamic design of the rear side. Our attention to detail even extends to the material, configuration, and finish of the surround: The corrugated surround is coated with damping material, which is also found in our professional speaker units. All these refinements have resulted in a richer and clearer bass and the smooth, coloration-free reproduction in the mid-to-low frequency range. SILENT* Enclosure (*Structurally Inert Laminated Enclosure Technology)  SILENT* ENCLOSURE - ULTIMATE STRENGTH The cornerstones of its outstanding physical properties are its combination of birch plywood braces, MDF panels and Bi-Directional ADS Port featuring 10mm-thick hard anodized aluminum side panels that provide superior strength and vibration dampening. Additionally, optimization of the enclosure size and port layout have eliminated standing waves up to 250Hz. *SILENT: Structurally Inert Laminated Enclosure Technology Bidirectional ADP* (*Aero Dynamic Port)  RICH, CONTROLLED BASS REPRODUCTION Another innovative approach to achieving ideal sound is the Bidirectional ADS* Port. It incorporates slotted ports (channels) in the right and left side panels, with flared openings to the front and rear to allow air to flow smoothly through them. The symmetrically placed port openings, both laterally and along the front-rear axis, reduce port noise and prevent internal standing waves from escaping from the ports. You will be amazed at how such a compact speaker can deliver a room full of rich, powerful bass. |
| Others | Weight: 29kg (1 unit) Dimensions: 287 mm (W) × 510 mm (H) × 447 mm (D) |
| Accessories | woofer grille, jumper cables, cleaning cloth, owner’s manual |
| Optional Accessories | TAD-ST2TX Stands; available in Black |